Designed for flexible production of architectural glass; demanding special bendings and mixed production. Used also for special vehicle and big bus windscreens. Facades Skywalks Domes

Features:

• The wagons can be loaded simultaneously with different moulds for bullet resistance and architectural glass without affecting the operation cycles of each type of glass.
• Normally comes with two wagons, but can also be built with three or four wagons. Even start with just one wagon and a later upgrade of the furnace is possible.
• The bending section is located in the middle while the preheating/ cooling/ loading/ unloading sections are at the sides.
• The inspection windows are located on three sides of the wagon for easy visual control of the bending process.
• The cooling is arranged by opening the covers
  at the preheating/ cooling/ loading/ unloading stations equipped with a stepless sliding mechanism.
  The cooling can also be arranged using an inverter-controlled blower with an adjustable
  vent at the top of the preheating/ cooling/loading/unloading stations. The blower can also be used for more effective preheating.
• The hinged, spring-balanced front walls of the wagons, as well as the openable covers at the loading/unloading stations make the handling of the glass easy. The smooth wagon movements are motorised, speed-controlled by frequency inverters, so that the glass doesn't slide against the moulds during wagon transfer.